Superyachts & expedition

Ultrasonic antifouling for superyachts and expedition yachts

Silent, invisible protection for running gear and seawater systems on yachts where reliability cannot be compromised and chemicals are not welcome in the anchorage. S/Y Encore has run it since build in 2013 and came through full survey clean.

What we protect, and with what

ProtectsPropellers · shafts · rudders · stabilisers · seawater pipework
Typical systemENVS1 · 4 channels · dual AC/DC supply
Request a transducer plan →
Transducer on rudder

The problem

The quietest failure point on board

A yacht’s seawater systems foul and scale slowly, out of sight, until an exchanger derates or a pipe has to come out at refit. Running gear picks up growth at anchor and gives it back as vibration and lost efficiency on passage.

The conventional answers, dosing and periodic dismantling, sit badly with an owner who wants protection that is silent, invisible and chemical-free in every anchorage.

What it protects

Running gear and seawater systems

  • Propellers, shafts, rudders and stabilisers. Transducers on the structure beside the gear carry the energy to the wetted surfaces. Nothing is fitted in the water flow.
  • Raw-water pipework, strainers and exchangers. Kept clear without dosing or dismantling.
  • Hull plating. Transducers bonded inside the plating protect the coating between haul-outs.

The system is inaudible to guests and crew. A four-channel ENVS1 module on a dual AC/DC supply covers the running gear and seawater systems of a yacht like Encore. Running gear in detail →

S/Y Encore, the Alloy Yachts AY45 sailing yacht, under sail seen from the air

“Thirteen years in service. Clean through. No scaling, no biological growth, no corrosion build-up. I'd recommend it to any serious offshore operator without hesitation.”

Jono Wishart · Skipper, S/Y Encore · Alloy Yachts AY45, fitted 2013
In service

Thirteen years, one survey, clean through

At build or refit

Fitted without drilling

  • At build: specified from the general arrangement, with cable routes in the electrical package. For yards and naval architects →
  • At refit or in service: transducers bond to the inside of the structure, so nothing is drilled and most installs need no haul-out.
  • Supported worldwide by the engineering team that builds it and by regional partners, with a three-year warranty, five with a Monitoring & Maintenance plan.
Questions

Questions captains and owners’ teams ask

All questions →

Can guests hear it?

No. The system is inaudible to guests and crew, and it operates outside the bands used by navigation sonar.

Is there long-term evidence on a yacht?

Yes. S/Y Encore, an Alloy Yachts AY45, was fitted at build in 2013. At full refit and survey the inspectors found pipework with no scaling, no biological growth and no corrosion build-up, after more than a decade without dosing or dismantling. Read the case →

Does it replace antifouling paint?

No. It protects the coating rather than replacing it, so the paint lasts longer and the hull comes out cleaner at haul-out.

Is it suitable for a smaller yacht or a tender?

For recreational boats, HullSonic, our leisure range, is sized and sold by boat length. ENVSonic is engineered for commercial vessels and large yachts.

Next steps

Not ready to enquire yet?

Send the GA. Get a transducer plan.

Tell us the vessel, the systems to protect and where she works. The engineers who design and build ENVSonic reply with a transducer plan and a proposal, typically within two working days. No sales script, and no obligation.