Harbour tugs bringing a cargo ship into port at sunset

Ultrasonic antifouling & marine growth prevention · since 2006Nothing grows.
Nothing leaches.

ENVSonic is the ultrasonic antifouling system engineered and built by GLOBAtech Australia since 2006, certified FCC, CE and RCM as a complete system, with 35,000+ units deployed and fleet operators specifying it as standard fitment. Zero biocides, zero anodes, zero docking for most installs.

35,000+
Units deployed
Up to 27%
Fuel penalty avoided · harbour tug fleet
IP68
Transducers, >10 m
FCC CE RCM
Certified as a complete system
Certified as a complete system
  • FCC
  • CE
  • RCM
Fleet references
Key facts

ENVSonic in brief

ENVSonic is the ultrasonic antifouling system designed, built and supported by GLOBAtech Australia, the original OEM in the category since 2006.

See the evidence →
What it is
An ultrasonic antifouling system: bonded transducers drive non-inertial cavitation at the protected surface so larvae, algae and barnacles cannot settle. No biocide, no anodes, nothing released into the water.
Who makes it
GLOBAtech Australia Pty Ltd, Coomera, Queensland: the original ultrasonic antifouling OEM, designing and building the system end to end since 2006.
Track record
35,000+ units deployed worldwide on commercial fleets, workboats, superyachts, processing barges and industrial cooling plant; case studies on the evidence page and fleet references on request.
Certification
FCC · CE · RCM for the complete system, control module to transducer, not the controller alone. Three-year warranty, or five years with a Monitoring & Maintenance plan.
What protects it
Proprietary footprint mount with up to 30% more ultrasonic transference; hermetically potted IP68 transducers; per-channel monitoring with daily self-calibration and unbonded-transducer shutdown.
Range
ENVS1 for vessels, fleets and industrial raw-water systems (4 and 6-channel modules, panel-mount or DIN-mount, cabinets from 6 to 54 channels); ENVS2 for deep-ocean and high-output work; ENVS2.sXDCR MAX smart transducer coming (patent pending).
Installation
Transducers bond to the inside of the structure: no drilling, no welding and no docking for most installs; retrofit in service or specified at the drawing stage.

Start here

What are you protecting?

Industries

Wherever raw water
meets steel

01 / 07
01 — Tugs, workboats & offshore

Ultrasonic antifouling for tugs, OSVs and workboats

A tug earns its keep alongside and on standby, in still harbour water, and that is where sea chests, box coolers and strainers foul fastest. ENVSonic keeps them clear from inside the hull, with no docking, no dosing and no anodes. Fleets that started with a two-tug pilot now fit it as standard.

ProtectsBox coolers · sea chests · strainers · raw-water pipework · thrusters and nozzles · hull plating
Typical systemENVS1 · 4 or 6 channels per module · 12/24 VDC
Tugs & offshore →
A harbour tug under way in port, the kind of vessel ENVSonic ultrasonic antifouling protects from inside the hull
02 — Pilot boats, launches & port craft

Ultrasonic antifouling for pilot boats and port craft

A pilot boat has to be ready at full speed at any hour. Weed on the hull, growth in the running gear or a choked strainer costs knots and reliability exactly when they matter. ENVSonic protects the hull, the gear and the cooling from inside the boat, on its own 12 or 24 volt supply, with nothing in the water.

ProtectsHull plating · propellers, shafts and jet drives · sea chests and strainers · engine cooling
Typical systemENVS1 · 4 or 6 channels · 12/24 VDC
Pilot boats & port craft →
123
03 — Bulk carriers, tankers, container & RoRo

Ultrasonic marine growth prevention for bulk carriers, tankers and deep-sea fleets

Fouling is the largest fuel and carbon lever a fleet can pull without changing the fuel or the route. ENVSonic protects the sea chests, coolers and niche areas of deep-sea ships today, says plainly where full-hull coverage stands, and proves the result on one of your own vessels before you commit a fleet.

ProtectsSea chests · box and central coolers · strainers and seawater pipework · thruster tunnels and running gear
Typical systemENVS1 cabinets, 6 to 54 channels · ENVS2 for high-output work
Commercial shipping →
Hull protection
04 — Chemical, power, LNG & desalination

Ultrasonic biofouling control for seawater-cooled plant

Wherever a plant takes seawater for cooling, biofilm and shell grow in the heat exchangers, the pipework and the strainers. ENVSonic controls that growth with ultrasound from the outside of the equipment: no dosing, nothing discharged, and no shutdown to fit.

ProtectsHeat exchangers and condensers · cooling-water pipework · strainers and intake screens · box coolers on barges and floating plant
Typical systemSized at survey · cabinets from 6 to 54 channels · 100–240 VAC
Process plant & seawater cooling →
1234
05 — Cooling towers, chillers & aquaculture

Ultrasonic biofilm and algae control for cooling towers and intakes

Cooling towers, chiller loops and intakes run warm, nutrient-rich water around the clock. ENVSonic controls the biofilm and algae that grow in it with ultrasound from the outside of the equipment, to cut the chemical load and the cleaning that go with it.

ProtectsCooling tower basins · chillers and heat exchangers · process pipework · aquaculture intakes and pens
Typical systemSized at survey · cabinets from 6 to 54 channels · 100–240 VAC
Cooling towers & HVAC →
Box cooler
06 — Shipyards & naval architects

Specify ultrasonic antifouling at the drawing stage

No through-hulls, no welding and no class-approved penetrations outside ballast tanks. We supply the transducer plan, cable schedule, integration drawings and the FCC, CE and RCM certificates for the complete system, and we support commissioning at the yard.

ProtectsTransducer plan · GA mark-ups · cable schedule · integration drawings · certificates
Typical systemOEM engineering · commissioning support · three-year warranty
Shipyards & NAs →
Five six-channel ENVSonic ENVS1 control modules on a DIN rail inside a 30-channel cabinet, with a circuit breaker for each module
07 — Superyachts & expedition

Ultrasonic antifouling for superyachts and expedition yachts

Silent, invisible protection for running gear and seawater systems on yachts where reliability cannot be compromised and chemicals are not welcome in the anchorage. S/Y Encore has run it since build in 2013 and came through full survey clean.

ProtectsPropellers · shafts · rudders · stabilisers · seawater pipework
Typical systemENVS1 · 4 channels · dual AC/DC supply
Superyachts →
Transducer on rudder
New · Next generation

Introducing

ENVS2 range

ENVS2 is ENVSonic’s deep-ocean and high-output range: higher-power equipment for the largest hulls and structures, from cabinet-mounted systems to smart transducers, remotely monitored and controlled over the dashboard and SCADA, scalable to any deployment. Built on twenty years as the ultrasonic antifouling pioneer and on the same IP68 transducers, proprietary footprint and self-aware channel control that run the ENVS1 fleet today.

Higher outputMore drive per channel for large plate areas and long cable runs.
Remote monitoredPer-channel health, calibration & alerts to the dashboard and SCADA; control from shore.
Targeted modesHull/chest · box cooler · heat exchanger · running gear · pipe · water column.
ScalableMulti-system deployments coordinated as one installation.

Coming: ENVS2.sXDCR MAX, the smart transducer (patent pending).

How it works

Sound, not chemistry

ENVSonic ultrasonic antifouling works by bonding transducers to the structure and sending curated ultrasonic bursts through the metal. At the wetted surface, non-inertial cavitation forms microscopic bubbles that stop larvae, algae and barnacles from ever settling. Surfaces stay smooth, flow stays at design, and nothing enters the water column. The self-aware control module tests, calibrates and isolates every channel on its own.

+30%
Energy transfer via proprietary footprint
Daily
Self-calibration per transducer
IP68
Hermetically potted transducers
ENVSonic ENVS1 ultrasonic antifouling transducer
ENVSonic proprietary transducer footprint mount
Diagram of ultrasonic non-inertial cavitation at the protected surface
S/Y Encore, the Alloy Yachts AY45 sailing yacht, under sail seen from the air

“Thirteen years in service. Clean through. No scaling, no biological growth, no corrosion build-up. I'd recommend it to any serious offshore operator without hesitation.”

Jono Wishart · Skipper, S/Y Encore · Alloy Yachts AY45, fitted 2013
Evidence

Measured results from fleets in service

News

Latest from ENVSonic

All news →

Get the vessel protected

Tell us the vessel, the systems to protect and where it operates. The OEM engineering team replies directly — literature, transducer counts and a proposal typically within two working days.