Fitted at build (Alloy Yachts AY45, 2013). At full refit and survey the inspectors found pipework with no scaling, no biological growth and no corrosion build-up — more than a decade without dosing or dismantling.
The problem
A superyacht’s seawater systems are the quietest failure point on board: raw-water pipework, strainers and exchangers that foul and scale slowly until an exchanger derates or a pipe has to come out at refit. The conventional answers, dosing and periodic dismantling, sit badly with an owner who wants silent, invisible, chemical-free protection in every anchorage.
What changed
Encore, an Alloy Yachts AY45, was fitted at build in 2013 with an ENVS1 four-channel system on dual AC/DC supply, protecting propellers, shafts, rudders, stabilisers and the raw-water pipework. Transducers were bonded via the proprietary footprint; nothing sits in the water flow and nothing enters the water column.
The result
When Encore went in for full refit and survey, the inspectors opened pipework that had not been dosed or dismantled since the vessel was built. They found no scaling, no biological growth and no corrosion build-up: thirteen years in service, clean through.
Thirteen years in service. Clean through. No scaling, no biological growth, no corrosion build-up. I’d recommend it to any serious offshore operator without hesitation.
Jono Wishart, Skipper, S/Y Encore
Why it matters beyond yachts
For superyachts the case is reliability and the anchorage. For commercial operators the same result reads as cooling capacity held at design, no diver cleans and no dosing cycle across a docking interval, on hardware that has now run for more than a decade. ENVSonic for superyachts → · Cooling-system protection →

