Two 18-channel ENVSonic cabinets, each assembled from three 6-channel DIN-mount control modules, shipped to a Service Operation Vessel newbuild at Cochin Shipyard in India. The modular architecture scales the channel count in steps of six inside a standard engine-room cabinet, with every channel individually monitored, calibrated and isolatable.
The problem
A Service Operation Vessel carries a lot of protected structure: sea chests, box coolers, raw-water pipework, thruster tunnels and running gear spread across the hull. A single large controller with long cable runs to every transducer is slow to install, awkward to integrate into a yard’s electrical package and hard to service channel by channel.
What changed
Two 18-channel ENVSonic cabinets left the workshop for the newbuild at Cochin Shipyard in India. Each cabinet is assembled from three 6-channel DIN-mount control modules, the building block of the ENVS1 platform, wired as one installation. The channel count scales in steps of six, the modules sit in a standard engine-room cabinet, and every channel is individually monitored, calibrated and isolatable.
- Scales with the vessel. Six, twelve, eighteen channels or more from the same module, so a yard specifies one part across a class.
- Cabinet standard. Industry-standard DIN mounting and cabling, so integration drawings and cable schedules slot into the yard’s own electrical package.
- Per-channel intelligence. Every transducer is calibrated daily, tested and shut down automatically if it becomes unbonded, exactly as on a four-channel workboat system.
The result
Yard-specified cabinets built from the same module used on a four-channel workboat system, delivered with the drawings the yard needed. The same architecture underpins the ENVS2 range, which adds remote monitoring and control for fleet-scale and industrial deployments.
Specify it at the drawing stage
Send the GA and the systems to protect and the engineering team returns a transducer plan, cable schedule and integration drawings. The spec-in pack → · For shipyards and naval architects →

