Two 18-channel ENVSonic cabinets recently left the workshop for a Service Operation Vessel newbuild at Cochin Shipyard in India. Each cabinet is assembled from three 6-channel DIN-mount control modules, the building block of the ENVS1 platform, wired as one installation.
Why modular matters
An SOV carries a lot of protected structure: sea chests, box coolers, raw-water pipework, thruster tunnels and running gear spread across the hull. Rather than a single large controller with long cable runs to every transducer, the DIN-mount architecture lets the channel count scale in steps of six and the modules sit in a standard cabinet in the engine room, with each channel individually monitored, calibrated and isolatable.
- Scales with the vessel. Six, twelve, eighteen channels or more from the same module, so a yard specifies one part across a class.
- Cabinet standard. Industry-standard DIN mounting and cabling, so integration drawings and cable schedules slot into the yard’s own electrical package.
- Per-channel intelligence. Every transducer is calibrated daily, tested and shut down automatically if it becomes unbonded, exactly as on a four-channel workboat system.
The same architecture underpins the ENVS2 range, which adds remote monitoring and control for fleet-scale deployments.
See the range → · Three parts, one OEM →
Adapted from Modular by Design, first published on globa.tech, 25 September 2025.



